標準編號 |
標準中文名稱 |
標準英文名稱 |
DL/T531-1994(2005復審) |
電站高溫高壓截止閥、閘閥技術條件 |
|
GB/T11689-1989 |
船用法蘭鑄鋼截止閥(四進位) |
Marine cast steel flanged stop valves |
GB/T12235-1989 |
通用閥門法蘭連接鋼制截止閥和升降式止回閥 |
General purpose industrial valves—Flanged steel globe valves and lift check valves |
GB/T12233-1989 |
通用閥門鐵制截止閥與升降式止回閥 |
General purpose industrial valves—Casting iron globe valves and lift check valves |
GB/T1951-1984 |
船用低壓外螺紋青銅截止閥 |
Marine low pressure bronze male threaded stop valves |
GB/T2499-1993 |
船用法蘭鑄鐵雙排截止閥箱 |
Marine cast iron flange dual-row stop valves-case |
GB/T590-1993 |
船用法蘭鑄鐵截止閥 |
Marine cast iron flanged stop valves |
GB/T594-1983 |
船用外螺紋鍛鋼截止閥 |
Marine forged steel male thread stop valves |
GB/T584-1999 |
船用法蘭鑄鋼截止閥 |
Marine cast steel flanged stop valves |
GB/T595-1983 |
船用外螺紋青銅截止閥 |
Marine bronze male thread stop valves |
GB/T587-1993 |
船用法蘭青銅截止閥 |
Marine bronze flanged stop valves |
JB/T7245-1994 |
制冷裝置用截止閥 |
|
JB/T7747-1995 |
針形截止閥 |
|
JB/T9081-1999 |
空氣分離設備用低溫截止閥和節流閥技術條件 |
|
JB/T53165-1999 |
高壓平衡截止閥 產品質量分等 |
|
JB/T53174-1999 |
截止閥 產品質量分等 |
|
JB/T53155-1999 |
空氣分離設備用低溫截止閥和節流閥 產品質量分等 |
|
JB/T8859-2004 |
截止閥 靜壓壽命試驗規程 |
|
HG/T3215-1986 |
聚三氟氯乙烯塑料襯里截止閥 |
|
NF E29-350-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves.) |
NF P43-001-2000 |
建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.) |
NF D36-380-2001 |
燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.) |
NF A84-621-2002 |
氣焊設備.焊接、切割和相關工藝用帶截止閥的速動連接 |
(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.) |
NF M88-771-1975 |
液化烴容器裝置.手動截止閥.制造.功能.試驗 |
(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.) |
NF P43-002-1981 |
建筑物水管閥門.水表截止閥.一般技術規范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.) |
BS EN 13709-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves) |
BS 1552-1995 |
一類、二類和三類燃氣用手動截止閥規范 |
(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar) |
BS 7461-1991 |
帶有流量調節器、閉路開關指示、閉合位置指示器開關或氣流量控制的電動自動氣體截止閥規范 |
(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control) |
BS 1010-2-1973 |
給排水設施用排放旋塞和截止(旋壓式)閥規范.第2部分:排放旋塞和地面上用截止閥 |
(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves) |
BS 1873-1975 |
石油、石油化學及有關工業用鋼球形閥、球形截止閥與單向閥(有法蘭及對接焊端)規范 |
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
BS 3457-1973 |
水龍頭與截止閥座墊圈材料規范 |
(Specification for materials for water tap and stopvalve seat washers) |
DIN 4817-1-1981 |
液態氣的截止閥.概念.安全技術要求.檢驗.標志 |
(Shut off valves for liquefied gases; definitions, requirement, testing, marking) |
DIN 86251-1998 |
造船用鑄鐵制帶法蘭的DN15至500的截止閥 |
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500) |
DIN 86260-1998 |
造船用炮銅制帶法蘭DN15至500的截止閥 |
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500) |
DIN 85003-4-1997 |
造船用管件的交貨技術條件.第4部分:截止閥 |
(Technical specifications for valves for shipboard use - Part 4: Stop valves) |
DIN 85003-6-1997 |
造船用管件的交貨技術條件.第6部分:手動截止閥 |
(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves) |
DIN 3399-1986 |
低壓截止閥.安全技術要求和檢驗 |
(Gas low-pressure cut-off valves; safety requirements, testing) |
DIN 3160-1974 |
公稱壓力25的冷卻劑循環直通截止閥 |
(Through-valves for refrigerant circuits, nominal pressure 25 bar) |
DIN 3161-1974 |
公稱壓力25的冷卻劑循環角形截止閥 |
(Elbow valves for refrigerant circuits; nominal pressure 25 bar) |
DIN 4056-1992 |
水管.街道地下截止閥門的路蓋.DVGW技術規范 |
(Water pipelines; valve boxes for stop valves; DVGW code of practice) |
DIN EN 1643-2001 |
燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000) |
DIN 86500-1968 |
船用螺紋連接的截止閥和閘閥等概述 |
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding) |
DIN 86254-2000 |
船只及造船技術.超輕型截止閥DN32-DN125(PN10) |
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10) |
DIN EN 13709-2003 |
工業用閥.鋼制球閥、球狀截止閥和止回閥 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
DIN EN 1213-1999 |
建筑閥門.建筑物中飲用水供應用銅合金截止閥.試驗和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999) |
DIN 86266-2002 |
船舶和航海技術.用手夾緊和法蘭連接的超輕型法蘭的截止閥 |
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10) |
GB/T1856-1993 |
船用法蘭鑄鐵單排排出截止閥箱 |
Marine flanged cast iron single arrangement exhaust stop box valve |
GB/T1854-1993 |
船用法蘭鑄鐵單排吸入截止閥箱 |
Marine flanged cast iron single arrangement suction stop box valve |
JIS B8605-2002 |
致冷裝置的截止閥 |
(Stop valves for refrigerants) |
JIS F7379-1996 |
造船.卡套式30K黃銅截止閥 |
(Shipbuilding -- Brass 30K stop valves with bite joint(s)) |
JIS E4103-1988 |
鐵路車輛用截止閥 |
(Cut-out cocks for railway rolling stock) |
JIS E4114-1989 |
鐵路車輛用青銅截止閥 |
(Bronze stop valves for railway rolling stock) |
QB/T3880-1999 |
衛生潔具、暖氣直角式截止閥技術條件 |
Technical requirements for sanitariness ware and heating angle valve |
QB/T3881-1999 |
衛生潔具、暖氣直角式截止閥型式和尺寸 |
Shapes and dimensions of sanitariness ware and heating angle valve |
JB/T10530-2005 |
氧氣用截止閥 |
|
標簽:
相關技術